Click the connect button in the Honeywell compass software and the modem will connect to the panel.
This is used to connect to the panel and activate all panel configuration changes.
2150 Ohm in series (300 Ohm 24v 390 Ohm, 24v 470 Ohm, 24v 1000 Ohm, 24v 150 Ohm, 12v 2150 Ohm in series (300 Ohm 12v 470 Ohm, 12v 1000 Ohm, 12v.3.3 Phone Line Simulator If the two above options fail your modem.
The setup to program these panels through the Honeywell Compass software is bulky and a bit of a mess as it requires far obsolete technology such as dial-up modems.Dino on the, dIY Security Forum and is the same wiring as the diagram published in the Honeywell Compass documents. You can find a list of modems Honeywell says works with the compass software in the supported modem document.Honeywell/First Alert Compass Download Document site:m.2.3.1 The Watelco Cable, this diagram was created by user. The connection to the panel is made at 300 baud and is very finicky with carrier detection so newer high speed modems just dont have good backwards capabilities down to those speeds.
Since you are directly connecting the modem to the panel you have to add power to the line for the modems to communicate.
Here are all the values I tested below and they all worked.
The equipment, here is the core things you need to download to your security alarm panel.Patience.1 Honeywell Compass Software Download, for legal reasons I cant give out the software but there are ways to find.This is critical and your modem will not be able to talk to the panel if not done correctly. This was a huge issue for me as I bought a Hayes SmartModem Optima 9600 which is in the supported modem document but not listed in the software and probably windows server 2012 r2 standard vm licensing took over 10 hours of tinkering with the whole setup to get it to work. You can buy the parts from any electronic supplier or just get them on Amazon:.47uF 474J Polypropylene Film Capacitor and 150 Ohm Resistors. The revision is the first number on the label attached to the prom chip on the panel circuit board. I also unchecked the Off after connect option in the modem setup so you can hear the whole connection process.They do sell products to simulate phone lines called Phone Line Simulators or Phone Line Emulators which you can pick up used off Ebay such as the Viking DLE-200B.Honeywell Interactive Compass Download Document site:m.